Technical noteAdjustments to Zatsiorsky-Seluyanov's segment inertia parameters
Abstract
Zatsiorsky et al. (in Contemporary Problems of Biomechanics, pp. 272–291, CRC Press, Massachusetts, 1990a) obtained, by means of a gamma-ray scanning technique, the relative body segment masses, center of mass (CM) positions, and radii of gyration for samples of college-aged Caucasian males and females. Although these data are the only available and comprehensive set of inertial parameters regarding young adult Caucasians, they have been rarely utilized for biomechanical analyses of subjects belonging to the same or a similar population. The main reason is probably that Zatsiorsky et al. used bony landmarks as reference points for locating segment CMs and defining segment lengths. Some of these landmarks were markedly distant from the joint centers currently used by most researchers as reference points. The purpose of this study was to adjust the mean relative CM positions and radii of gyration reported by Zatsiorsky et al., in order to reference them to the joint centers or other commonly used landmarks, rather than the original landmarks. The adjustments were based on a number of carefully selected sources of anthropometric data.
References (11)
- R.N. Hinrichs
Adjustments to the segment center of mass proportions of Clauser et al.
J. Biomechanics
(1990) - R.F. Chandler et al.
Investigation of inertial properties of the human body
AMRL TR 74–137
(1975) - C.E. Clauser et al.
Weight, volume and center of mass of segments of the human body
AMRL TR 69–70
(1969) - P. de Leva
Joint center longitudinal positions computed from a selected subset of Chandler's data
J. Biomechanics
(1996) - P. de Leva
Validity and accuracy of four methods for locating the center of mass of young male and female athletes
Cited by (2240)
Effect of suspensory strategy on balance recovery after lateral perturbation
2024, Human Movement SciencePostural stability is essential for performing daily activities and preventing falls, whereby suspensory strategy with knee flexion may play a role in postural control. However, the contribution of the suspensory strategy for postural control during sudden lateral perturbation remains unclear. We aimed to determine how suspensory strategy contributed to postural adjustment during sudden perturbation in the lateral direction and what knee flexion setting maximized its effect. Eighteen healthy young adults (10 male and 8 female) participated in this study. Kinematic data during lateral perturbation at three velocities (7, 15, and 20 cm/s) were collected under three knee flexion angle conditions (0°, 15°, and 65°) using motion capture technology. Postural adjustments to the external perturbation were assessed by four parameters related to the temporal aspects of the center of mass (COM): reaction time, peak displacement/time and reversal time, and minimum value of the margin of stability (minimum-MOS). Our results showed that the COM height before the perturbation significantly lowered with increasing knee flexion angle. The COM reaction times for low and mid perturbation velocities were delayed at 65° of knee flexion compared to 0° and 15°, and the COM reversal times were significantly shorter at 65° of knee flexion than at 0° and 15° across all perturbation velocities. The minimum-MOS at the high-velocity of perturbation was significantly smaller at 65° of knee flexion than at 0° and 15°. In conclusion, the adoption of a suspensory strategy with slight knee flexion induced enhanced stability during sudden external and lateral perturbations. However, excessive knee flexion induced instability.
Dynamic joint stiffness in individuals with femoroacetabular impingement syndrome pre- and post-hip arthroscopy
2024, Clinical BiomechanicsPatients with hip-related pain often fail to return to their desired level of activity following hip arthroscopy. Lasting biomechanics alterations may be one potential explanation. Dynamic joint stiffness assesses the mechanistic controls of the lower limb during high impact movements, and thus, may provide valuable clinical targets to improving movement and optimizing return to activity after surgery.
Twenty-five participants (13 females) with hip-related pain underwent 3D motion capture during a drop jump task before surgery and six months post-operatively. Nineteen healthy controls (9 females) were collected for comparison. Sagittal plane dynamic joint stiffness was calculated during the initial landing phase. Baseline and 6-month dynamic joint stiffness data were compared 1) between males and females with hip-related pain and 2) between individuals with hip-related pain and controls using Wilcoxon Signed-Rank and Mann Whitney U tests. Sexes were analyzed separately.
From baseline to 6 months post-operatively, females with hip-related pain demonstrated decreased dynamic ankle stiffness (2.26 Nm/deg. [0.61] to 1.84 Nm/deg. [0.43]) (p = .005) and males with hip-related pain demonstrated increased dynamic hip stiffness (2.73 [0.90] to 3.88 [1.73]) (p = .013). There were no differences in dynamic stiffness at any joint between individuals with hip-related pain at either timepoint when compared to controls (p ≥ .099).
Females and males with hip-related pain may demonstrate unique changes in dynamic joint stiffness after surgery, indicating return to activity may follow different trajectories for each sex. Additional work should examine the relationship between hip joint stiffness and treatment outcomes and identify additional movement-related rehabilitation targets.
Android obesity could be associated with a higher fall risk than gynoid obesity following a standing-slip: A simulation-based biomechanical analysis
2024, Journal of BiomechanicsIt is well recognized that overall obesity increases fall risk. However, it remains unknown if the obesity-induced increase in the fall risk depends upon the adipose distribution (or obesity type: android vs. gynoid). This pilot study examined the effects of fat deposition region on fall risk following a standing-slip trial in young adults with simulated android or gynoid adiposity. Appropriate external weights were attached to two groups of healthy young lean adults at either the abdomen or upper thigh region to simulate android or gynoid adiposity, respectively, with a targeted body mass index of 32 kg/m2. Under the protection of a safety harness, both groups were exposed to an identical standing-slip on a treadmill with a maximum slip distance of 0.36 m. The primary (dynamic gait stability) and secondary (latency, length, duration, and speed of the recovery step, slip distance, and trunk velocity) outcome variables on the slip trial were compared between groups. The results revealed that the android group was more unstable with a longer slip distance and a slower trunk flexion velocity than the gynoid group at the recovery foot liftoff after the slip onset. The android group initiated the recovery step later but executed the step faster than the gynoid group. Biomechanically, the android adipose tissue may be associated with a higher fall risk than the gynoid fat tissue. Our findings could provide preliminary evidence for considering fat distribution as an additional fall risk factor to identify older adults with obesity at a high fall risk.
Estimation of sagittal-plane whole-body angular momentum during perturbed and unperturbed gait using simplified body models
2024, Human Movement ScienceHuman whole-body angular momentum (WBAM) during walking typically follows a consistent pattern, making it a valuable indicator of the state of balance. However, calculating WBAM is labor-intensive, where the kinematic data for all body segments is needed, that is, based on a full-body model. In this study, we focused on selecting appropriate segments for estimating sagittal-plane WBAM during both unperturbed and perturbed gaits, which were segments with significant angular momentum contributions. Those major segments were constructed as a simplified model, and the sagittal-plane WBAM based on a simplified model was calculated by combining the angular momenta of the selected segments. We found that the WBAM estimated by seven-segment models, incorporating the head & torso (HT) and all lower limb segments, provided an average correlation coefficient of 0.99 and relative angular momentum percentage of 96.8% and exhibited the most similar sensitivity to external perturbations compared to the full-body model-based WBAM. Additionally, our findings revealed that the rotational angular momenta (RAM) of lower limb segments were much smaller than their translational angular momenta (TAM). The pair-wise comparisons between simplified models with and without RAMs of lower body segments were observed with no significant difference, indicating that RAMs of lower body segments are neglectable. This may further simplify the WBAM estimation based on the seven-segment model, eliminating the need to estimate the angular velocities of lower limb segments. These findings have practical implications for future studies of using inertial measurement units (IMUs) for estimating WBAM, as our results can help reduce the number of required sensors and simplify kinematics measurement.
A biomechanical analysis of turning during gait in individuals with different subtypes of Parkinson's disease
2024, Clinical BiomechanicsTurning while walking is a complex component of locomotor capacity, which can be challenging in the daily lives of people with Parkinson's disease. The aim of the study was to compare biomechanical strategies during turning of gait in individuals with Parkinson's disease and its different clinical subtypes.
A cross-sectional study, comprising of 43 individuals with idiopathic Parkinson's disease, divided in subgroups: akineto-rigid, dominant tremor and mixed. Motor impairment was assessed using the Unified Parkinson's Disease Rating Scale. The gait biomechanical parameters (number of steps, step length, cadence, amplitude, velocity and radius of the turn) were analyzed during turning in a kinematics laboratory. In the statistical analysis, a comparison was made between subgroups, and correlations between biomechanical parameters.
There was no statistically significant difference between the subgroups. In the correlation analysis, notable correlations were found between the anticipatory step length and the following variables: number of steps (r = −0.418), step length while turning (r = 0.805), step length after turning (r = 0.644), average velocity (r = 0.830), average velocity while turning (r = 0.755), and maximum velocity (rho = 0.835).
The difficulties primarily occur during the anticipatory phase of the turn, which affects the entire task. The greater the length of the anticipatory step, the greater the length of the step taken to turn as well as the step taken after turning. And the greater the velocity, the greater the step length, and to fewer steps taken to perform the task.
The interaction effect of different footwear types and static navicular drop or dynamic ankle pronation on the joint stiffness of the lower limb during running
2024, Gait and PostureAlthough the effects of footwear type on joint stiffness have previously been investigated, researchers did not consider foot flexibility. Thus, the present investigation aimed to determine the interaction effects of footwear type, static navicular drop and dynamic ankle pronation on dynamic joint stiffness in running.
Does the footwear types in interaction with the foot posture affect the stiffness of the joints of the lower limb?
Forty-seven male individuals participated in this study. Firstly, they were divided into the high navicular, low navicular, and normal navicular drop. Secondly, they were divided into the high dynamic ankle pronation, low dynamic ankle pronation, and normal dynamic ankle pronation groups. Participants performed three running trials at 3 ± 0.2 m/s at minimalist footwear, conventional footwear, and barefoot conditions. We collected the ground reaction forces and three-dimensional kinematic data and calculated joint stiffness over the stance phase.
There was no significant main effect of navicular drop or dynamic ankle pronation on dynamic joint stiffness for the ankle, knee, and hip (p > 0.05). However, footwear type significantly affected dynamic joint stiffness. The pairwise comparison revealed that the ankle and hip dynamic joint stiffness magnitudes in the conventional footwear condition were greater than in the barefoot and minimalist footwear conditions (p 0.001). In contrast, the knee dynamic joint stiffness magnitude in the conventional footwear condition was lesser than in barefoot and minimalist footwear conditions (p 0.001).
The navicular drop or dynamic ankle pronation did not influence lower limb joint stiffness, and there was no significant interaction between navicular drop or dynamic ankle pronation and footwear on lower limb dynamic joint stiffness. However, conventional footwear increased the ankle and hip dynamic joint stiffness while reducing knee dynamic joint stiffness, leading to changes in transfer energy, which could have implications for relative injury risk.
- ∗
Current address: Paolo de Leva, Laboratorio di Biomeccanica, ISEF Statale di Roma, P. Lauro de Bosis, 6, 00194 Rome, Italy.